2017-2020 Ford Fusion Auto Start Stop Eliminator | Plug & Play
Description
2017-2020 Ford Fusion Auto Start Stop Eliminator
The Ford Fusion Auto Start-Stop system is designed to shut the engine off automatically under certain conditions when the vehicle comes to a stop, then restart the engine when driving resumes. Ford states that the system is automatically enabled again when the vehicle is started, while pressing the center-console Auto Start-Stop button switches it off only for the current ignition cycle.
For drivers who regularly prefer Auto Start-Stop switched off, the Recontrol-X Auto Start Stop Eliminator removes the repeated routine of pressing the A-OFF button after every startup.
Remembers Your Auto Start-Stop Preference
Rather than removing the factory control, this plug-in module works with the existing Auto Start-Stop switch circuit and is designed to automatically restore your preferred setting after the vehicle is restarted.
Key benefits include:
- Reduces repeated A-OFF button presses after each ignition cycle.
- Retains factory button control, so Auto Start-Stop can still be changed when desired.
- Uses the original switch wiring and connectors rather than requiring permanent wiring modification.
- Plug-and-play inline installation behind the center-console switch assembly.
- Removable design allows the factory wiring connection to be restored later.
- Includes a trim-removal tool to assist with console-panel access.
This operating principle is consistent with established 2017-2020 Fusion-specific eliminators that automatically restore the driver's Auto Start-Stop preference while keeping the original button functional.
Important: Without Active Park Assist Only
This product configuration is specifically intended for 2017-2020 Ford Fusion vehicles WITHOUT Active Park Assist.
Before ordering, inspect the switch panel beside the rotary gear selector.
The compatible configuration has the standalone Auto Start-Stop A-OFF switch shown in the product images.
If the switch assembly also contains the Active Park Assist control identified by the steering-wheel/P symbol, this version should not be selected.
That distinction matters because the switch assembly and electrical connector configuration differ between the two console layouts. Other Fusion-specific products using the same style of connector likewise identify the applicable version as “Without Active Park Assist.”
Factory-Connector Installation
The eliminator installs directly behind the factory Auto Start-Stop switch assembly in the center console.
A typical installation involves opening the console area, carefully releasing the surrounding trim panels, lifting the upper console trim, disconnecting the factory harness from the Auto Start-Stop switch, and connecting the eliminator inline between the vehicle wiring harness and the original switch.
Comparable Fusion installations identify two 7 mm retaining screws beneath the side trim before the upper console trim is lifted.
The plug-in design means:
- No wire cutting
- No wire splicing
- No permanent modification to the factory harness
- No ECU reflash required for the inline switch installation
Once the connectors are fully seated, reinstall the console trim and verify operation before driving.
Factory Button Control Is Retained
Installing the eliminator does not mean you lose the ability to use Auto Start-Stop.
The factory A-OFF button remains part of the system, allowing the driver to change the Auto Start-Stop state when desired. Published Fusion-specific eliminator documentation specifically describes maintaining the original start-stop button functionality.
This makes the product different from a permanent wiring deletion or ECU modification: the goal is to make the preferred Auto Start-Stop setting convenient while preserving normal driver control.
Verified Vehicle Coverage
The supplied Recontrol-X fitment data lists:
2017 Ford Fusion
2018 Ford Fusion
2019 Ford Fusion
2020 Ford Fusion
Trim and engine coverage are not separately identified in the supplied fitment table, so those fields should not be added or guessed.
The most important checkout verification is the actual console configuration:
2017-2020 Ford Fusion + factory Auto Start-Stop button + WITHOUT Active Park Assist + matching connector/switch layout.
Before Ordering
Confirm all of the following:
- Your vehicle is a listed 2017-2020 Ford Fusion.
- Your vehicle has the factory Auto Start-Stop A-OFF button.
- Your switch panel matches the WITHOUT Active Park Assist example.
- Your vehicle does not have the Active Park Assist steering-wheel/P button in that switch cluster.
- Compare the visible switch layout and connector configuration with the product photos before checkout.
Not Intended as a Repair Module
This product is designed for a normally functioning factory Auto Start-Stop system where the driver simply prefers a different default behavior.
It should not be presented as a repair for an Auto Start-Stop warning, electrical fault, damaged switch, weak battery, charging-system problem, or another existing vehicle malfunction. Ford's documentation notes that Auto Start-Stop availability depends on multiple operating conditions, including battery state, cabin climate requirements and other vehicle inputs.
Vehicle Fitment
Additional Information
| Brand | Recontrol-X |
Reviews
S&Q
Does this Auto Start Stop Eliminator fit my 2017-2020 Ford Fusion?
This product is listed for 2017, 2018, 2019, and 2020 Ford Fusion, but the center-console configuration matters. It is designed for vehicles WITHOUT Active Park Assist and with the standalone factory Auto Start-Stop A-OFF button shown in the product images. Compare your switch panel with the photos before ordering. Fusion-specific eliminators using this configuration are likewise identified for vehicles without Active Park Assist.
How can I tell whether my Ford Fusion has the correct switch panel?
Look at the controls beside the rotary gear selector. The compatible version has the standalone Auto Start-Stop A-OFF switch shown on this page. If your switch cluster includes an Active Park Assist button with a steering-wheel/P symbol, this version is not the correct configuration. Compare the switch arrangement carefully rather than ordering by model year alone.
Will I still be able to turn Auto Start-Stop back on?
The module is designed to restore your preferred Auto Start-Stop setting automatically after startup while retaining the factory A-OFF button functionality. If you want Auto Start-Stop active for a particular drive, you can still use the original button to change the setting.
Where does the eliminator install, and do I need to cut any wires?
The module installs behind the factory Auto Start-Stop switch in the center console. After accessing the upper console trim, disconnect the factory switch harness and connect the eliminator inline between the vehicle wiring harness and the original switch. No wire cutting or splicing is required. Fusion-specific installation instructions describe this same connector-based procedure.
Will this fix an Auto Start-Stop warning or a system that has already stopped working?
No. This product is intended to change the everyday behavior of a normally operating Auto Start-Stop system; it is not a repair module for an existing electrical, battery, switch, charging-system, or Auto Start-Stop fault. Ford notes that the factory system can become unavailable under several operating conditions, including battery state and climate-control demands, so an existing malfunction should be diagnosed separately.