Cadillac CT6 2016-2018 3.0L/3.6L V6 AFM/DFM Disabler
Description
Cadillac CT6 2016-2018 3.0L/3.6L V6 AFM/DFM Disabler
What it does: This electronic AFM/DFM disabler is designed to keep a compatible engine in full-cylinder operation while the module is connected. It does not permanently reflash the factory ECU.
Fitment: Cadillac CT6 2016-2018 3.0L/3.6L V6 AFM/DFM Disabler
Installation and limit: OBD-II module helps prevent cylinder deactivation while preserving factory ECU programming. This is an electronic disabler, not a mechanical AFM delete kit or performance tuner; it does not replace lifters, camshafts, an oil manifold or other internal engine parts. Confirm the listed engine and AFM/DFM configuration before ordering.
Product details
Maintain Full-Cylinder Operation in Your Cadillac CT6
The Recontrol-X AFM/DFM Disabler for Cadillac CT6 is designed for the listed 2016–2018 3.0L and 3.6L V6 applications.
Once connected to the factory OBD-II port, the module helps prevent compatible Active Fuel Management cylinder-deactivation operation, keeping the engine in full-cylinder mode while active.
Built for CT6 V6 Cylinder-Deactivation Systems
Cadillac specifically described the CT6’s 3.0L Twin Turbo V6 as using cylinder deactivation when the model was introduced. By 2018, Cadillac’s official specifications explicitly listed Active Fuel Management on both the 3.0L Twin Turbo V6 and 3.6L V6.
That makes this product category particularly relevant for owners who prefer continuous full-cylinder operation.
Smooth, Consistent Response
Consistent Throttle Feel: Helps reduce operating-mode changes that may alter throttle response.
Predictable Acceleration: Maintains a more consistent engine operating state when power demand changes.
Full-Cylinder Driving: Helps retain full-cylinder operation rather than allowing compatible cylinder deactivation.
True Plug & Play Installation
Direct OBD-II Connection: Connects to the factory diagnostic port.
No Cutting or Splicing: Factory wiring stays intact.
No Special Tools: No mechanical installation is required.
No Permanent ECU Flash: The module is designed to work without permanently rewriting factory calibration.
Keep Factory ECU
The module provides a removable approach instead of permanent tuning.
Factory Programming Remains Intact: Permanent ECU changes are not required.
Restore Stock Operation Easily: Remove the unit from the OBD-II port whenever factory cylinder-deactivation control is desired.
Intelligent Power Guard monitors the battery and protects the module from voltage spikes and deep discharge.
Comparable OBD-II AFM/DFM modules also use built-in power management because these products are normally left connected during vehicle operation.
Electronic Control — Not Mechanical Engine Modification
This module is not a camshaft/lifter delete kit and is not a conventional horsepower tune.
Its function is focused on compatible AFM/DFM cylinder-deactivation control while retaining the original vehicle hardware and factory ECU calibration.
Exact Vehicle Fitment
2016 Cadillac CT6 — 3.0L V6
2017 Cadillac CT6 — 3.0L V6
2018 Cadillac CT6 — 3.0L V6
2016 Cadillac CT6 — 3.6L V6
2017 Cadillac CT6 — 3.6L V6
2018 Cadillac CT6 — 3.6L V6
Quick Installation
Step 1: Turn the vehicle off.
Step 2: Locate the factory OBD-II port.
Step 3: Insert the Recontrol-X module.
Step 4: Allow initialization to complete.
Step 5: Start the vehicle and drive normally.
Package Includes
1 × Recontrol-X AFM/DFM Disabler Module
Important Fitment Notice
This module fits 2016–2018 Cadillac CT6 3.0L V6 and 3.6L V6 applications. Confirm your model year and engine displacement before ordering.
What This Version Covers
This version is built for the Ct6, model years 2016-2018, with 3 listed applications. The range is deliberate: vehicles of the same name outside those years use a different harness or a different control strategy, and they are sold as separate versions rather than folded into this listing.
The listing is tied to the applications above. Any trim, engine or model year that is not listed falls outside this version, so match those details before ordering.
2017 Cadillac CT6 — 3.0L V6
2018 Cadillac CT6 — 3.0L V6
2017 Cadillac CT6 — 3.6L V6
2018 Cadillac CT6 — 3.6L V6
Step 2: Locate the factory OBD-II port.
Step 3: Insert the Recontrol-X module.
Step 4: Allow initialization to complete.
Step 5: Start the vehicle and drive normally.
Vehicle Fitment
Additional Information
| Brand | Recontrol-X |
Reviews
FAQ
No questions yet. Check back soon or contact us for more information.