Description
2014–2018 Chevrolet SS 6.2L V8 AFM/DFM Disabler
Enjoy a more consistent V8 driving experience with the Recontrol-X AFM/DFM Disabler for the 2014–2018 Chevrolet SS 6.2L V8. This compact module connects to the factory OBD-II port and helps keep the compatible engine operating in full-cylinder mode. There is no wire cutting, added harness or permanent ECU reprogramming, making it a convenient option for Chevrolet SS owners who want straightforward installation and easy reversibility.
Made for the Chevrolet SS 6.2L V8
This listing is built around one clearly defined application: the 2014, 2015, 2016, 2017 and 2018 Chevrolet SS with the 6.2L V8 engine. The product title, fitment table and installation information all use that exact application so you can check compatibility before ordering. No other engine or unrelated Chevrolet model is included in this listing.
Why Chevrolet SS Owners Choose Recontrol-X
- Full-cylinder operation: Helps prevent AFM/DFM cylinder-deactivation operation on the compatible 6.2L V8 application.
- More consistent response: Helps reduce the change in engine feel associated with transitions between cylinder-deactivation and full-cylinder operation.
- Plug-and-play connection: Installs directly into the factory OBD-II/Data Link Connector.
- No permanent ECU changes: Does not require ECU flashing or permanently rewrite the factory calibration.
- Easy to remove: Unplug the module whenever you want to return the vehicle to its factory control strategy.
- Compact installation: No wire cutting, splicing or additional wiring harness is required.
A More Consistent Full-Cylinder Driving Feel
AFM and DFM strategies are designed to deactivate selected cylinders under certain operating conditions. Some drivers prefer the engine to remain in full-cylinder mode because it can provide a more uniform throttle feel and more consistent power delivery during everyday driving. The Recontrol-X module is designed to help the compatible Chevrolet SS 6.2L V8 stay in full-cylinder operation while the device is connected.
The module does not add horsepower, tune the engine or permanently alter the ECU. Its purpose is focused: helping prevent cylinder-deactivation operation on the exact vehicle application listed on this page.
True Plug-and-Play OBD-II Installation
You do not need to open the dashboard, cut factory wires or install a separate harness. The Recontrol-X AFM/DFM Disabler uses the vehicle’s existing OBD-II/Data Link Connector. On the Chevrolet SS, the connector is located beneath the instrument panel to the left of the steering wheel.
- Park the vehicle safely and switch the ignition off.
- Locate the factory OBD-II/Data Link Connector under the instrument panel.
- Align the Recontrol-X connector and press it firmly into place.
- Allow the module to initialize, then start the vehicle and drive normally.
The OBD-II plug is keyed to fit in the correct orientation. Do not force the connector. If you need the diagnostic port for a scan tool or service equipment, switch the vehicle off and remove the module first.
No ECU Flashing and No Permanent Reprogramming
The Recontrol-X AFM/DFM Disabler works through the OBD-II connection and does not require a custom tune. Because the factory ECU calibration is not permanently rewritten, there is no complicated software restoration process when you want to return to the original cylinder-deactivation strategy. Switch the vehicle off, unplug the device and the vehicle can resume its factory control behavior.
Exact Vehicle Fitment
MakeChevrolet ModelSS Model Years2014, 2015, 2016, 2017, 2018 Engine6.2L V8 ConnectionFactory OBD-II/Data Link Connector
Fitment must match the year, make, model and engine together. A similar OBD-II connector alone does not confirm compatibility. Review the Vehicle Fitment tab on this page and verify that your vehicle is a Chevrolet SS with the 6.2L V8 engine from one of the listed model years.
Designed for Convenient Daily Use
Once installed, the compact module remains connected at the diagnostic port and requires no daily buttons or settings. Its removable design also makes it easy to access the port when the vehicle needs diagnostics or service. Reconnect the module after the diagnostic work is complete if you want to continue using it.
What Is Included
1 × Recontrol-X AFM/DFM Disabler Module
The product is supplied as a ready-to-connect OBD-II module. No separate wiring harness, programming cable or software download is needed for the plug-and-play installation described above.
Check Before You Order
- Confirm the vehicle make is Chevrolet.
- Confirm the model is SS.
- Confirm the model year is 2014, 2015, 2016, 2017 or 2018.
- Confirm the engine is the 6.2L V8.
If every detail matches, this is the Recontrol-X AFM/DFM Disabler listing for your application. Checking the complete fitment before purchase helps avoid choosing a module intended for a different Chevrolet model, model year or engine.
Vehicle Fitment
Additional Information
| Brand | Recontrol-X |
Reviews
S&Q
Will this AFM/DFM disabler fit a 2014-2018 Chevrolet SS 6.2L V8?
Yes. This listing is specifically matched to the 2014, 2015, 2016, 2017 and 2018 Chevrolet SS with the 6.2L V8 engine. Confirm the year, model and engine together before ordering.
Where is the OBD-II port on a Chevrolet SS?
The Data Link Connector is under the instrument panel to the left of the steering wheel. Switch the vehicle off before connecting the Recontrol-X module and make sure the plug is fully seated.
Does the Recontrol-X AFM/DFM Disabler require ECU tuning or wire cutting?
No. It uses the factory OBD-II connection and does not require ECU flashing, wire cutting or an additional wiring harness.
Can I restore the factory cylinder-deactivation operation?
Yes. Switch the vehicle off and unplug the module from the OBD-II port. The module does not permanently rewrite the factory ECU calibration, so removing it returns the vehicle to its factory control strategy.
What should I verify before ordering this Chevrolet SS AFM/DFM Disabler?
Confirm that the vehicle is a Chevrolet SS, the model year is between 2014 and 2018, and the engine is the 6.2L V8. This listing does not claim fitment for other engines, models or years.
What is included with the Recontrol-X AFM/DFM Disabler?
The package includes one Recontrol-X AFM/DFM Disabler module for the compatible 2014-2018 Chevrolet SS 6.2L V8 application.