Description
Pontiac G6 AFM/DFM Disabler for 2007–2009 V6 Applications
The Recontrol-X AFM/DFM Disabler for Pontiac G6 provides a focused solution for compatible vehicles listed in the Vehicle Fitment table. It connects through the factory OBD-II/Data Link Connector and helps keep the supported engine operating in full-cylinder mode during normal driving. The installation is fully plug and play and does not require a custom tune, permanent ECU rewrite or modification to factory wiring.
Matched Pontiac G6 Fitment
This product covers the exact applications supplied for SKU RC-AFM-DFM-01-35: 2007 Pontiac G6 with the 3.9L V6, 2007 Pontiac G6 GTP with the 3.6L V6, and 2008–2009 Pontiac G6 GXP with the 3.6L V6. Because trim and engine affect compatibility, check the complete row in the fitment table before purchase.
Consistent Full-Cylinder Operation
AFM/DFM strategies can deactivate selected cylinders under certain operating conditions. When connected to a compatible Pontiac G6, the Recontrol-X module helps prevent that cylinder-deactivation operation and supports a more consistent throttle response and power delivery. It does not claim additional horsepower or change the factory engine calibration.
Simple OBD-II Installation
- Switch the vehicle off and park safely.
- Locate the factory OBD-II/Data Link Connector beneath the dashboard.
- Insert the Recontrol-X module firmly into the connector.
- Allow it to initialize, then start the vehicle and drive normally.
No wires are cut, spliced or extended. If a scan tool or service equipment needs the diagnostic port, switch the vehicle off and remove the module first.
Easy to Remove and Fully Reversible
The module does not permanently overwrite the ECU calibration. To return to the factory control strategy, switch the vehicle off and unplug the device from the OBD-II port.
Vehicle Fitment
MakePontiacModelG6 / G6 GTP / G6 GXPYears2007–2009 as listedEngines3.9L V6 and 3.6L V6
Fitment is limited to the exact year, model/trim and engine combinations shown in the Vehicle Fitment tab. Do not use the product based only on the connector shape or vehicle family.
Package Includes
1 × Recontrol-X AFM/DFM Disabler Module
Before Ordering
Confirm the vehicle is a Pontiac G6, then match its exact year, trim and engine to one of the four fitment rows. This check helps avoid selecting a module for a different vehicle configuration.
Vehicle Fitment
Additional Information
| Brand | Recontrol-X |
Reviews
S&Q
Will this fit my Pontiac G6?
It fits only the four exact applications listed: 2007 G6 3.9L V6, 2007 G6 GTP 3.6L V6, and 2008–2009 G6 GXP 3.6L V6.
Does installation require cutting wires or ECU tuning?
No. The Recontrol-X module connects to the factory OBD-II port and requires no wire cutting, splicing, added harness or ECU flashing.
What if I need the OBD-II port for a scan tool?
Switch the vehicle off, unplug the module, and connect the scan tool. Reconnect the module after service if you want to continue using it.
Can I return the car to its original operation?
Yes. The module does not permanently rewrite the ECU calibration. Switch the vehicle off and unplug it to restore the factory control strategy.
What should I verify before ordering?
Match the year, Pontiac G6 trim and engine to one of the four Vehicle Fitment rows. Connector shape alone does not confirm compatibility.