2022-2026 Infiniti QX60 Auto Start Stop Eliminator | Plug & Play
Description
2022-2026 Infiniti QX60 Auto Start Stop Eliminator
The Infiniti QX60 Idling Stop System can automatically switch the engine off when the vehicle is stopped and restart it when driving resumes. For drivers who prefer Idling Stop disabled during everyday driving, the factory control means repeating the same A/OFF button routine after startup.
Automatic Start/Stop Preference After Startup
The Recontrol-X Auto Start Stop Eliminator is designed to remove that repeated routine. Once installed, the module automatically places the factory Idling Stop function in the off state after startup, so the vehicle begins each trip with the preference already handled.
This product is intended as a driver-convenience solution. It does not alter engine performance, add horsepower, or replace diagnosis of an existing Start/Stop system fault.
Factory A/OFF Button Remains Usable
The product does not remove the original Start/Stop controls from the vehicle. The supplied product material shows that the factory A/OFF button can still be used whenever you want to enable the system again for the current drive.
This is an important difference from permanently removing the factory function: the original control remains available while the module handles the preferred Start/Stop state automatically after startup.
Vehicle-Specific Inline Harness Design
This QX60 version uses two plug-in harness sections connected by a longer lead. Product images show one harness at approximately 5.75 inches, the second at approximately 6.02 inches, and a connecting lead at approximately 27.56 inches.
The connectors are designed to install inline with the vehicle's existing console wiring rather than requiring the original wires to be cut or spliced.
Center-Console Installation
Installation is performed in the center-console/cupholder area, where the factory Start/Stop switch and related power-point connections are located. Access requires careful removal of the applicable console trim, and a trim-removal tool is pictured with the supplied kit.
After connecting the inline harnesses, route the longer lead so it sits securely behind the trim and cannot be pinched during reassembly. Fully seat each connector and locking tab before reinstalling the console panels.
Because this is a physical connector-based module rather than an ECU software tune, the installation is centered on the console wiring connections rather than vehicle programming.
Reversible Rather Than Permanent
Because the module connects through plug-in harnesses, the modification can be reversed. If you later want the vehicle returned to its original wiring configuration, remove the module and reconnect the original factory plugs.
This makes the product different from a wiring modification that permanently alters the vehicle harness.
Confirmed Vehicle Fitment
The supplied fitment sheet lists:
- 2022 Infiniti QX60
- 2023 Infiniti QX60
- 2024 Infiniti QX60
- 2025 Infiniti QX60
- 2026 Infiniti QX60
Trim and engine coverage are not listed separately in the supplied fitment data. Before ordering, confirm that your QX60 has the factory Idling Stop/A-OFF control and compare the console and connector layout with the product photos.
Do not assume compatibility with another Infiniti model, Nissan model, or additional model year simply because the dashboard controls appear similar.
What This Product Is — and Is Not
This is a plug-in Start/Stop convenience module for drivers who want the QX60 to default to Idling Stop off without manually pressing A/OFF after every startup.
It is not an ECU tune, performance upgrade, fuel-economy device, or repair for an existing warning or malfunction. If the vehicle already has an Idling Stop fault message or related electrical issue, that condition should be diagnosed before installation.
For the correct 2022-2026 QX60 application, the main benefits are straightforward: automatic Start/Stop preference after startup, retained factory button control, connector-based installation, hidden console mounting, and reversible factory-style connections.
Vehicle Fitment
Additional Information
| Brand | Recontrol-X |
Reviews
S&Q
Does this Auto Start Stop Eliminator fit my Infiniti QX60?
Yes. Fitment is listed for 2022, 2023, 2024, 2025 and 2026 Infiniti QX60. Trim and engine coverage are not listed separately, so confirm your vehicle has the factory Idling Stop/A-OFF control and compare the console connector layout with the product images before ordering.
What does the module actually do after I start the vehicle?
It automatically places the factory Idling Stop function in the off state after startup, removing the need to press the A/OFF button at the beginning of every drive. It does not remove the factory system; it changes the normal startup preference.
Can I still turn Auto Start/Stop back on when I want it?
Yes. The factory A/OFF control remains usable. If you want Idling Stop active for a particular drive, use the original button to change the setting. The module is designed for convenience rather than permanently deleting the factory function.
Where does it install, and do I need to cut wires?
The harness installs in the center-console/cupholder area and connects inline with the factory Start/Stop switch and related power-point wiring. The connector-based design does not require cutting or splicing the original vehicle harness. Carefully route the lead before reinstalling the console trim.
Can I remove it later or use it to fix a Start/Stop fault?
The module can be removed and the original factory connectors reconnected. It is not a repair device, however. If your QX60 already shows an Idling Stop warning, electrical fault, or related malfunction, diagnose that condition before installing the eliminator.