Skip to main content
Recontrol-X
Shop
Vehicle
Support
Recontrol-X

Cadillac AFM & DFM Disablers

Cadillac AFM/DFM Fitment Guide — Built From Recontrol-X Application Data

Choosing a Cadillac AFM/DFM disabler should begin with the vehicle's published application data—not with engine displacement, appearance or model family alone.

The current Recontrol-X Cadillac catalog contains dedicated fitment for selected ATS, CT6, CTS, Escalade, Escalade ESV, Escalade EXT, SRX, XT5, STS and XTS applications.

Each product is mapped to specific Year + Model + Engine combinations. If your complete combination is not included in the published fitment, compatibility should not be assumed.

Current Recontrol-X Cadillac Fitment Coverage

Cadillac Model Published Year Range Published Engine Fitment
ATS 2012–2019 3.6L V6
CT6 2016–2018 3.0L V6 / 3.6L V6
CTS 2004–2018 3.6L V6 / 6.0L V8 / 6.2L V8
Escalade 2010–2017 6.2L V8
Escalade ESV 2010–2017 6.2L V8
Escalade EXT 2010–2013 6.2L V8
SRX 2004–2009 3.6L V6
XT5 2016–2019 3.6L V6
STS 2005–2007 3.6L V6
XTS 2013–2018 3.6L V6

Important: This table summarizes the current Recontrol-X Cadillac catalog. Final product selection should always follow the fitment shown on the individual product page.


Why Engine Size Alone Cannot Identify the Correct Cadillac Disabler

The Recontrol-X catalog itself shows why searching only by displacement can lead to the wrong product.

For example, 3.6L V6 applications appear across ATS, CT6, CTS, SRX, XT5, STS and XTS—but those applications do not share the same published model-year boundaries.

The same issue appears with 6.2L V8 applications. Recontrol-X lists 6.2L fitment across CTS and multiple Escalade variants, but the supported year ranges differ by model.

That means:

“Cadillac 3.6L” is not a complete fitment.

and:

“Cadillac 6.2L” is not a complete fitment.

The useful compatibility combination is:

Year + Model + Engine

—not displacement by itself.


How to Use Search by Vehicle

Use the vehicle selector above before opening a product.

Step 1 — Select Cadillac

Start with the vehicle make.

Step 2 — Select the exact model

ATS, CTS and XTS may share an engine displacement in the published catalog, but they are different vehicle applications.

Step 3 — Match the model year

Do not extend a listed year range simply because the next model year looks similar.

Step 4 — Match the engine

Use the complete engine information shown in the product fitment.

Step 5 — Check the individual product page

Any product-specific compatibility or installation note should be reviewed before ordering.

If the exact Year + Model + Engine combination is not listed, do not substitute a “close” application.

 

 

Cadillac AFM and DFM applications

Cadillac applications vary across ATS, CT6, CTS, Escalade, SRX, XT5, STS and XTS model years and engines. Match the product to the exact year, model, engine and connector shown in the application record. A plug-in module changes the listed cylinder-deactivation request while connected; it does not correct a mechanical engine fault.

Fast Shipping

Free standard shipping in the contiguous US

Quality Guarantee

All parts backed by a 3-year warranty

Secure Payment

100% secure online transactions

Expert Support

Our technical team is ready to help

Stay in the loop
By entering your email address you agree to receive marketing
messages from Re-ControlX. You may unsubscribe at any time.