Ask ten GM owners where their Auto Stop button lives and you will get two different answers. A 2020 Silverado driver points at the switch bank low on the center stack. A 2023 Tahoe driver points at the same symbol in a different part of the dash, and the wiring behind it goes somewhere else entirely. Both trucks shut the engine off at a red light, both turn the feature back on every time you start the engine, and both owners are tired of pressing the button. The fix for each one, though, plugs into a different place.
That split is the reason our GM listings are organized the way they are. The 2019 to 2021 Silverado 1500 and Sierra 1500 use a module that sits inline behind the factory switch. The 2021 to 2026 Tahoe, Suburban and Yukon use a harness that plugs in at the body control module under the driver side of the dash. The two parts do not interchange. This guide walks through how GM's own documents describe the system, how to tell which layout your truck has, why a 2021 or 2022 build might have no Auto Stop at all, and what the install looks like on each one so you know what you are getting into before you order.
Key Takeaways
If you only have a minute, this table covers what most owners ask us first.
| Question | Short answer |
|---|---|
| Which trucks use the switch-style module? | 2019-2021 Silverado 1500 and Sierra 1500 pickups with a factory Auto Stop button. It plugs in behind that button on the center stack. |
| Which trucks use the BCM-style harness? | 2021-2026 Tahoe, Suburban, Yukon and Yukon XL. It plugs in at the K9 body control module behind the driver-side lower dash panel, on the dark blue connector. |
| Can one part fit both? | No. The connectors, locations and wiring are different. |
| Does every 2021 or 2022 truck have Auto Stop? | No. GM built many V8 trucks and SUVs from June 2021 without it (RPO NSS). No button on the dash means there is nothing to fix. |
| What does the factory button do on its own? | It turns Auto Stop off until the engine is shut down. GM states the system is enabled again on every start. |
| Price? | All seven GM full-size listings in this guide are $79.99. |
What GM says the system does
Before getting into hardware, it helps to read GM's own description, because the behavior that bothers owners is written right into the manual. The 2021 owner's manual insert that covers the Escalade, Tahoe, Suburban, Yukon, Yukon XL, Silverado 1500 and Sierra 1500 describes the feature this way: when the brakes are applied and the vehicle is at a complete stop, the engine may turn off, and the tachometer reads AUTO STOP. Release the brake or press the accelerator and the engine restarts. The same page carries a warning that the vehicle may restart and move if you get out without shifting to Park, which is worth repeating to anyone who borrows your truck (GM 2021 owner's manual insert).
The line that matters for this article is short: "Auto Stop is enabled each time you start the vehicle." Pressing the button with the A-in-a-circle symbol turns the system off, and the light on the button tells you its state. Shut the engine off, start it again, and you are back to the default. GM repeated the same wording for the refreshed trucks. The 2025 Silverado 1500 Getting to Know guide says the Engine Stop/Start system "is enabled each time the vehicle is started" (2025 Silverado Getting to Know guide).
There is a reason for that default. Fuel economy ratings are earned with the system on, and the system only helps if it runs. Federal figures put the gain in a realistic range rather than a dramatic one. Fueleconomy.gov lists stop-start at a potential efficiency improvement of about 2 percent (fueleconomy.gov), while the EPA's green vehicle guide says start-stop "can improve fuel economy by 4%–5%," with the biggest benefit in stop-and-go city driving where the engine would otherwise idle (EPA). A truck that spends most of its life on the highway sees very little of that. A truck that crawls through school pickup lines every afternoon sees more.
Why it does not stop every time
Owners often notice the engine stays running at some lights and shuts off at others, and wonder whether something is broken. The manual lists the conditions that keep the engine running or restart it early. Among them:
- The climate control needs the engine to heat or cool the cabin.
- The battery charge is low, or the battery was recently disconnected.
- The truck has not reached a minimum speed since the last Auto Stop.
- The engine or transmission is not at operating temperature, or the outside temperature is out of range.
- The shifter is in any gear other than D, or Tow/Haul or another driver mode is selected.
- The vehicle is on a steep grade.
- The driver door is open, the driver seat belt is unbuckled, or the hood is open.
- The Auto Stop has already lasted the maximum allowed time.
That list explains a lot of the "it works sometimes" complaints we hear. On a hot afternoon with the AC on high, a Tahoe may not shut down at all. Turn the fan down a notch at a long light and it shuts off a few seconds later. None of that is a fault. It is the controller deciding that the conditions are right.
The battery is part of the design
The same manual notes that trucks with Stop/Start use an Absorbed Glass Mat (AGM) 12-volt battery, and that installing a standard flooded battery "will result in reduced 12-volt battery life." It also suggests using a charger's AGM setting to limit charge voltage to 14.8 volts. If your truck has had a cheap replacement battery installed, the system may refuse to stop the engine because it reads the state of charge as too low. That is a battery problem, not a reason to buy a module, and no plug-in part will fix it. Our battery cost ledger goes through what an AGM replacement actually costs and when it is due.
Two layouts, two kinds of module
GM's full-size trucks and SUVs share a lot of engineering, so it surprises people that the Auto Stop modules split by body style. The reason is where the signal from the button can be reached.
Generation one: 2019-2021 Silverado 1500 and Sierra 1500
The fourth-generation half-ton pickups that launched for 2019 carry the Auto Stop button in the switch bank on the lower center stack. Our 2019-2021 Silverado 1500 Auto Start Stop Eliminator and 2019-2021 Sierra 1500 Auto Start Stop Eliminator use a short harness, about 6.10 inches (155 mm) long, with a small control module between two matching connectors. You unplug the factory switch, plug the module in between the button and the truck's harness, and lock both connectors. The truck's own wiring is never cut.
Once it is in, the truck starts with your OFF preference restored, and the factory button still works. If you want Auto Stop on for a long stretch of city driving, you press the button the same way you always did. That point matters to us because some owners assume the part takes the control away. It does not, and we would rather you know that up front.
Generation two: 2021-2026 Tahoe, Suburban and Yukon
The fifth-generation SUVs that arrived for the 2021 model year moved the job to a different place. The 2021-2026 Tahoe Auto Start Stop Eliminator, 2021-2026 Suburban Auto Start Stop Eliminator and 2021-2026 Yukon Auto Start Stop Eliminator plug in at the K9 body control module. You remove the lower trim panel on the driver's side, find the row of connectors on the BCM, unplug the dark blue connector, and put the harness inline. No cutting, no splicing, no programming through the OBD-II port.
The detail people miss is the connector color. A light blue plug sits right next to the dark blue one, and under the dash with a flashlight the two can look nearly the same. The harness goes on the dark blue one. Our installation photos show both side by side for that reason. Take a minute to compare before you unplug anything.
One more point that saves a question: the Yukon listing covers the Yukon XL too. The fitment list on that product page runs from the 2021 Yukon through the 2026 Yukon XL, so XL owners order the same part.
Side-by-side comparison
Here is the same information in one place. Everything in this table comes from the live product pages and GM's documents linked in this article.
| 2019-2021 Silverado / Sierra 1500 | 2021-2026 Tahoe / Suburban / Yukon | |
|---|---|---|
| Where it installs | Behind the Auto Stop button on the lower center stack | K9 body control module, behind the driver-side lower dash panel |
| Connection | Inline between the factory button and the switch harness | Inline on the dark blue BCM connector (the light blue one is wrong) |
| Hardware | About 6.10 in (155 mm) harness with a small module | BCM-plug harness |
| Factory button after install | Still works for manual changes | Still present on the dash |
| Wire cutting or programming | None | None |
| Removal | Unplug and reconnect the factory plug | Unplug and reconnect the factory plug |
| Listings | Silverado eliminator, Silverado memory module, Sierra eliminator, Sierra memory module | Tahoe, Suburban, Yukon / Yukon XL |
| Price | $79.99 | $79.99 |
The trim work is the slowest part of either job. On the pickups you are working around a center stack with plastic clips that get brittle in cold weather. On the SUVs you are lying on your back under the steering column. Neither needs special tools beyond a trim tool and a screwdriver, and most owners finish in well under an hour once the panel is off.
Eliminator or memory module on the pickups?
The 2019-2021 Silverado and Sierra each have two listings: an Auto Start Stop Eliminator and an Auto Start Stop Memory Module. We get asked which one is "better" more than any other question about these trucks, so here is the honest answer.
Both install in the same spot, behind the center-stack switch. Both use the same 6.10-inch inline harness. Both restore your OFF preference at startup, and both leave the factory A-OFF button usable so you can turn Auto Stop back on whenever you like. Both cost $79.99. The product pages describe them in nearly the same terms, and "memory module" is simply the more literal description of what the part does: it remembers the setting you use.
So pick by your truck, not by the name. A Silverado owner can order either the Silverado eliminator or the Silverado memory module. A Sierra owner can order either the Sierra eliminator or the Sierra memory module. What you should not do is order a Silverado part for a Sierra or the other way around without checking with us first. The trucks are close cousins, but we list them separately so each page can show the matching install photos.
The 2021 and 2022 trucks built without Auto Stop
This is where the model year stops being a reliable guide. In June 2021, short on semiconductors, GM started building many of its V8 trucks and SUVs without the Stop/Start feature. GM Authority reported on June 7, 2021 that most vehicles built on or after that date with a V8 and the 10-speed automatic would not get automatic engine stop-start, and quoted Chevrolet's Kevin M. Kelly saying customers would see "a minor reduction in fuel economy" and receive a $50 credit on the MSRP of affected vehicles (GM Authority).
The owner's manual insert printed that year says it plainly: "Some vehicles built on or after 6/7/2021 are not equipped with the Stop/Start System" (GM 2021 manual insert). GM's service bulletin 21-NA-132 fills in the detail technicians need. It applies to 2021 and 2022 Escalade, Cheyenne, Silverado 1500, Suburban, Tahoe, Sierra 1500 and Yukon models with the listed V8 engines and the MQB or MQC 10-speed automatic, and identifies the trucks built without the feature by a new option code, RPO NSS, "Not Equipped with Automatic Stop/Start" (GM TSB 21-NA-132 via NHTSA).
According to that bulletin, on an NSS truck the Auto Stop disable switch is not present, the instrument cluster no longer shows "Auto Stop," and some internal transmission parts were left out, so the transmission cannot do the stop-start function at all. Other hardware stayed the same, including the starter, battery, wiring, connectors and the T19 multifunction power supply converter.
What that means when you shop
- If your 2021 or 2022 truck or SUV has no Auto Stop button on the dash, it was almost certainly built with RPO NSS. You do not need any of these parts. Save your money.
- If the button is there and the cluster shows AUTO STOP at lights, the system is active and the matching module applies.
- Some vehicles built after the change still carried the feature, which is why GM's wording says "most" and "some." Look at the truck, not the calendar.
You can confirm with the option list. GM's manual says the production options are encoded in the barcode on the certification label on the driver's door pillar, and if that label has no large barcode, the same information is printed on a label inside the glove box (GM 2021 manual insert). Look for NSS. A truck with KL9 and no NSS has the system. If you would rather not read option codes, a dealer service desk can pull the build list from the VIN in a minute.
Which generation do you have?
For most owners this takes about thirty seconds. Work down the list and stop at the first line that matches.
- Is it an SUV? A 2021-2026 Tahoe, Suburban, Yukon or Yukon XL is generation two. Go to the Tahoe, Suburban or Yukon listing.
- Is it a 2019 or 2020 Silverado 1500 or Sierra 1500 with an Auto Stop button? That is generation one.
- Is it a 2021 pickup? Check for the button. If it is there, generation one applies. If not, see the section above on NSS trucks.
- Is it a 2022 pickup? Find out which 2022 it is. GM sold two different trucks that year, covered in the next section.
- Is it a 2023 or newer pickup? Our current 2019-2021 listings do not cover it. Contact us with the VIN before ordering.
If your vehicle is a Silverado or Sierra 1500 and the year is right but the switch bank looks nothing like our install photos, stop and send us a picture. Trucks that have had dash work, aftermarket accessories wired into the switch circuit, or a swapped center stack sometimes look different behind the panel, and it is quicker to sort out by photo than by return.
The two 2022 Silverados
The 2022 model year is the one that catches people. GM delayed the refreshed Silverado, so for the first half of that model year it built a carryover version of the 2019-2021 truck, sold as the 2022 Silverado 1500 Limited (or LTD). GM Authority described it as a stop-gap and the fourth model year of the fourth-generation truck, with production starting at Silao on October 4 and at Fort Wayne on October 11, 2021. The refreshed 2022 Silverado followed in February 2022 for Regular Cab and Crew Cab models (GM Authority). GMC did the same thing with the Sierra, selling the carryover truck as the Sierra 1500 Limited.
The quickest way to tell them apart is inside. The Limited keeps the earlier interior and switch layout. The refreshed truck has a new dash and a different center stack. That matters because our pickup modules are built around the 2019-2021 switch, and the current listings are labeled 2019-2021. If you own a 2022 Limited that looks exactly like the earlier trucks behind the panel, send us the VIN and a photo of the switch bank and we will tell you yes or no before you spend anything. We do not want you guessing on a carryover truck, and we will not promise a fit that is not printed on the product page.
The Limited also changed the engine lineup. It dropped the 4.3L V6 and the older 5.3L L82, making the 2.7L turbo standard on the lower trims and the 5.3L L84 with Dynamic Fuel Management standard on RST Crew Cab models. Keep that in mind if you are reading forum posts about these trucks, because advice written for one engine does not always carry over.
Checks before you order
Most of the problems we see are avoidable with five minutes of looking. Before you check out:
- Confirm the button is there. No button, no product needed. This is the single most common mistake on 2021 and 2022 trucks.
- Confirm the model and year match the listing. Silverado and Sierra parts are listed separately. The Yukon listing includes the Yukon XL.
- Look at the install photos on the product page. On the SUVs, find the dark blue BCM connector. On the pickups, look at the switch bank behind the trim.
- Check the battery if Auto Stop has gone quiet. If the engine never stops at all, the system may be holding off because the battery is weak or was recently disconnected. A module is the wrong fix for that.
- Note any previous electrical work. Remote starters, upfitter switches and BCM repairs can change what you find behind the panel. Tell us before you order.
If your truck has a warning light, a stall, a crank-no-start, or a starter that grinds, sort that out first. These modules manage normal factory Stop/Start behavior. They are not repair parts for an electrical fault, and installing one on a truck with an existing problem only makes the diagnosis harder.
Install notes from the bench
Neither job is hard, but both reward patience. A few things we have learned from owners who called us halfway through:
On the 2019-2021 pickups
- Start with the lower trim bezel fastener, then pull the bezel outward. Work the clips one at a time instead of pulling a whole edge at once.
- Release the surrounding dash trim and remove the panel screws until you can reach the back of the switch bank. You do not need to take the whole center stack out.
- Unplug the Auto Stop switch connector, plug the module in between the button and the truck harness, and listen for the lock on each side.
- Start the truck before you snap the trim back. Check that the button light behaves the way you expect, then put the panels back.
Cold plastic breaks. If it is below freezing, warm the cab for ten minutes first.
On the 2021-2026 SUVs
- Remove the lower trim panel on the driver's side to reach the BCM connector bank.
- Identify the dark blue connector against the install photo, and only then unplug it.
- Install the harness inline and make sure both connector locks are fully seated. A half-latched connector is the most common reason a part seems not to work.
- Tuck the harness away from the pedal assembly and steering column before refitting the panel.
To go back to stock on either truck, unplug the module and reconnect the factory plug. Nothing is reflashed, so there is nothing to undo in software.
What changes after the install
The day-to-day difference is small but you notice it every drive. You start the truck, and Auto Stop is already off. At the first red light the engine keeps idling, the AC stays cold, and pulling into traffic does not involve the pause while the engine refires. That pause is the main complaint we hear from towing customers and from people who make a lot of left turns across traffic.
You also keep the choice. On the pickups, press the factory button and Auto Stop is back on for that drive. If you spend a day in heavy city traffic and want the few percent of fuel savings the EPA describes, use it. If you spend the next day on the highway or towing a trailer, leave it off. The part simply stops the truck from forgetting your choice every time you turn the key.
What does not change: the starter, battery and charging system on these trucks are the same parts GM fitted at the factory. The service bulletin on NSS trucks notes that GM kept the starter, battery and power supply converter unchanged even on trucks built without the feature (GM TSB 21-NA-132). Keep using the correct AGM battery when it is time to replace it.
For a longer look at each truck family, see our Silverado and Sierra Auto Stop guide and our Tahoe, Yukon and Suburban guide. You can also browse the whole Chevrolet and GMC Auto Stop aisles.
Frequently asked questions
Will the pickup module fit my Tahoe, or the other way around?
No. The 2019-2021 pickup modules plug in behind the center-stack switch, while the 2021-2026 SUV harness plugs into the K9 body control module under the driver-side dash. The connectors and locations are different.
Is there a separate Yukon XL part?
No. The 2021-2026 Yukon listing covers both the Yukon and the Yukon XL. The fitment list on the product page runs through the 2026 Yukon XL.
My 2021 Silverado has no Auto Stop button. Which part do I need?
None. GM built many 2021 and 2022 V8 trucks from June 2021 without Stop/Start, coded RPO NSS. With no button and no AUTO STOP display, there is no system to manage.
Which is better on a 2019-2021 Silverado or Sierra, the eliminator or the memory module?
They install in the same place behind the switch, use the same 6.10-inch inline harness, restore your OFF preference at startup, keep the factory button usable and cost the same. Choose the listing that matches your truck.
Can I still turn Auto Stop on after installing it?
Yes. The factory button stays in place. On the pickups, the product pages state the A-OFF button remains usable for manual changes.
Does it fit a 2022 Silverado?
Our current pickup listings cover 2019-2021. The 2022 Silverado Limited is a carryover of the earlier truck, while the refreshed 2022 has a new interior. Send us the VIN and a switch-bank photo before ordering for any 2022.
Will it void my warranty or change my engine software?
It does not reflash or reprogram anything, and it unplugs to return to stock. Coverage decisions belong to the dealer and manufacturer, so keep the factory connector intact and remove the module before warranty electrical diagnosis if you are asked to.
Why does my engine sometimes not stop even with Auto Stop on?
GM lists many conditions that block an Auto Stop: climate demand, low battery charge, a recently disconnected battery, engine or outside temperature, Tow/Haul mode, a steep grade, an open door or hood and more. That is normal behavior.
Sources
Every outside figure in this article links to one of these sources. Store experience is described in general terms only.
- GM owner's manual insert, 2021 Escalade, Tahoe/Suburban, Yukon/Yukon XL, Silverado 1500, Sierra 1500 · Stop/Start operation, conditions, AGM battery, 6/7/2021 note, option label
- GM Service Bulletin 21-NA-132 (via NHTSA) · RPO NSS and KL9, affected 2021-2022 models
- GM Authority, June 7, 2021 · Stop-start removed from some 2021 trucks; $50 MSRP credit
- GM Authority, December 17, 2021 · 2022 Silverado 1500 Limited carryover and production dates
- 2025 Chevrolet Silverado 1500 Getting to Know guide · Stop/Start enabled each time the vehicle starts
- Fueleconomy.gov, other fuel-saving technologies · Stop-start potential improvement
- EPA Green Vehicle Guide, advanced gasoline and diesel vehicles · Start-stop fuel economy range
Next steps
Know your truck? Go straight to the part:
- 2019-2021 Chevy Silverado 1500 Auto Start Stop Eliminator
- 2019-2021 Chevy Silverado 1500 Start Stop Memory Module
- 2019-2021 GMC Sierra 1500 Auto Start Stop Eliminator
- 2019-2021 GMC Sierra 1500 Start Stop Memory Module
- 2021-2026 Chevy Tahoe Auto Start Stop Eliminator
- 2021-2026 Chevy Suburban Auto Start Stop Eliminator
- 2021-2026 GMC Yukon and Yukon XL Auto Start Stop Eliminator
Still not sure, or own a 2022? Send us the VIN and a photo of your switch bank or BCM connectors and we will confirm the fit before you order. Everything else lives in the Auto Start Stop Eliminator aisle.