Skip to main content
Recontrol-X
Shop
Vehicle
Support
Recontrol-X

Silverado / Sierra Auto Start-Stop Eliminator: Full Guide

By Recontrolx Team 355 views Start-Stop
Silverado / Sierra Auto Start-Stop Eliminator: Full Guide

If you drive a 2019, 2020 or 2021 Silverado 1500 or Sierra 1500 with Stop/Start, you probably have a habit by now. Start the truck, reach for the center stack, press the A-in-a-circle button. Every trip. Miss it once and the engine shuts off at the first red light, and you remember why you started pressing it in the first place.

This guide is for owners of those trucks. It explains what GM's manuals say the system does and why the button never stays off, which 2021 trucks were built without the feature at all, how our two plug-in parts work and how they differ (less than the names suggest), what the install involves, and what changes afterward. Every outside fact links to its source, and the product facts come from the live product pages.

Key Takeaways

The answers most owners want first.

QuestionShort answer
Why does the button not stay off?GM designed it that way. The manuals say Auto Stop "is enabled each time you start the vehicle."
Which trucks does this cover?2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500 with a factory Auto Stop button.
Eliminator or memory module?Both plug in behind the factory button, restore your OFF setting at each start, keep the button usable and cost $79.99. Pick the listing for your truck.
Does every 2021 truck have Auto Stop?No. GM built most V8 trucks with the 10-speed from June 2021 without it (RPO NSS). No button means nothing to fix.
Where does it install?Behind the Auto Stop switch on the lower center stack. Not under the hood, not at the OBD-II port.
Does it change towing?No. GM already blocks Auto Stops in Tow/Haul mode. The part only changes the default at startup.

Find your part →

How Stop/Start works on these trucks

The 2019 Silverado 1500 owner's manual describes the system this way: "If equipped, the Stop/Start system will shut off the engine to help conserve fuel. It has components designed for the increased number of starts." When the brakes are applied and the truck is at a complete stop, the engine may turn off and the tachometer shows AUTO STOP. When you release the brake or press the accelerator, the engine restarts (2019 Silverado 1500 owner's manual).

2019 Chevrolet Silverado 1500 Z71 crew cab

The manual also lists when the engine will not stop, or will restart before you lift off the brake. This list explains most of the "it only works sometimes" reports:

  • The climate control needs the engine to heat or cool the cab.
  • The battery charge is low, or the battery has recently been disconnected.
  • The truck has not reached a minimum speed since the last Auto Stop.
  • The accelerator pedal is pressed.
  • The engine or transmission is not at operating temperature, or the outside temperature is out of range.
  • The truck is in any gear other than D.
  • Tow/Haul Mode or other driver modes have been selected.
  • The truck is on a steep hill or grade.
  • The driver door has been opened or the driver seat belt unbuckled.
  • The hood has been opened.
  • The Auto Stop has reached the maximum allowed time.

So the truck that shuts down at every light on a mild spring morning may never shut down on a hot August afternoon with the air on high. That is the controller working, not a fault.

Where owners notice it

The complaints we hear from Silverado and Sierra owners are consistent. The restart pause when pulling out across traffic from a stop sign. The cab warming up at a long light in summer because the compressor has stopped. The constant stop and start in a drive-thru line or a job site gate. And the button, every single trip. None of it is a mechanical problem. It is how the system was designed, and some owners simply prefer a truck that idles.

Why the button never stays off

GM's manual is direct about it: "If equipped, the automatic engine Stop/Start feature can be disabled and enabled by pressing the switch" with the A-in-a-circle symbol. "Auto Stop is enabled each time you start the vehicle." When the light on the switch is lit, the system is on (2019 Silverado 1500 owner's manual). The 2021 owner's manual insert for the Silverado 1500, Sierra 1500 and the full-size SUVs repeats the same sentence (GM 2021 manual insert).

There is a reason for the default. Fuel economy ratings are earned with the system on, and a system that stays off by default would not deliver the savings it was rated for. From GM's point of view, resetting at every start is the point. From the owner's point of view, it means pressing a button on every trip for as long as you own the truck, and anyone who borrows it gets Auto Stop whether they expect it or not.

The fuel savings themselves are real but modest. Fueleconomy.gov puts the potential improvement from stop-start at about 2 percent (fueleconomy.gov), and the EPA says it "can improve fuel economy by 4%–5%," mostly in stop-and-go city driving (EPA). A truck that spends most of its time on the highway or towing sees very little of that.

The 2021 trucks built without Auto Stop

This is the most common reason people order a part they do not need. In June 2021, GM stopped fitting Stop/Start to most of its V8 trucks with the 10-speed transmission. GM's service bulletin 21-NA-132 says: "Beginning in June 2021, most 2021 Escalade models, Cheyenne, Silverado 1500, Suburban, Tahoe, Sierra 1500, Yukon models equipped with L84 or L87 with MQB or MQC 10-speed transmissions will be produced without the Automatic Stop/Start feature." Those trucks carry the option code RPO NSS (GM bulletin 21-NA-132). GM Authority reported the change at the time, including a $50 credit off the sticker price on affected trucks (GM Authority, June 2021).

The bulletin also describes how an NSS truck differs: "the Automatic Stop/Start disable switch will not be present, the instrument cluster will no longer show 'Auto Stop,' and some internal transmission components have been omitted from the vehicle." The transmission "will not be capable of the Automatic Stop/Start function." GM kept the starter, battery, power supply converter, wiring and connectors the same (GM bulletin 21-NA-132).

What you see on your 2021What it means
An A-in-a-circle button on the center stack and AUTO STOP on the tachometer at stopsThe truck has Stop/Start; our parts apply
No button, and the engine never shuts off at a stopLikely an NSS truck; there is nothing to fix
Not sureCheck for NSS or KL9 on the option code label in the glove box, or send us the VIN

An NSS truck cannot have the feature added back, because the transmission was built without some of the parts. If you bought a late 2021 truck with no button, it left the factory that way.

Eliminator and memory module: what they really are

We sell two parts for these trucks, each in a Silverado and a Sierra version: an Auto Start Stop Eliminator and an Auto Start Stop Memory Module. The names suggest two very different products. On these trucks they are not. Earlier versions of this guide described the eliminator as switching the system off entirely with the button no longer used. That was wrong, and we have corrected it here to match the product pages.

Auto Start Stop EliminatorStart Stop Memory Module
What it doesRestores your preferred OFF setting at each startRestores your preferred OFF setting at each start
Factory A-OFF buttonStays usable for manual changesStays usable for manual changes
Where it installsInline behind the Auto Stop switch, lower center stackInline behind the Auto Stop switch, lower center stack
HardwareAbout 6.10 in (155 mm) harness with a small moduleAbout 6.10 in harness with a small module
Cutting, splicing or programmingNoneNone
Silverado listing2019-2021 Silverado eliminator2019-2021 Silverado memory module
Sierra listing2019-2021 Sierra eliminator2019-2021 Sierra memory module
Price$79.99$79.99

Both product pages make the same point in their own words. The eliminator page says it "restores your preferred setting while retaining factory switch control," and warns against describing it as a way of deleting the factory system forever. The memory module page says the same thing about its own design: it is not a permanent software delete. So if you want Auto Stop on for a day of heavy city traffic, you press the button as you always did, with either part.

Our advice is simple: choose the listing that matches your truck's badge. A Silverado part for a Silverado, a Sierra part for a Sierra. They are listed separately and should not be cross-ordered.

Find your part

Use the model year on your registration or VIN record. Then check three things.

  1. The badge. Silverado 1500 or Sierra 1500. Heavy-duty trucks are not covered by these listings.
  2. The year. 2019, 2020 or 2021. For a 2021, confirm the button is there.
  3. The switch. Look for the A-in-a-circle button in the switch bank on the lower center stack, and compare your layout with the photos on the product page.
You driveOrder
2019-2021 Chevrolet Silverado 1500 with Auto StopSilverado eliminator or Silverado memory module
2019-2021 GMC Sierra 1500 with Auto StopSierra eliminator or Sierra memory module
2021 truck with no Auto Stop buttonNothing; it was built without the system
2022 Silverado or SierraSend us the VIN and a photo of the switch bank first

The product pages do not separate coverage by engine or trim. What matters is that the truck has the factory Auto Stop button and a switch layout that matches the photos. If your dash has had work done, or you have upfitter switches or a remote starter wired into that area, send us a photo before ordering.

About the 2022 trucks

GM sold two different 2022 Silverados. The first was a carryover of the 2019-2021 truck, sold as the 2022 Silverado 1500 Limited, with production starting at Silao on October 4, 2021 and at Fort Wayne on October 11, 2021. The refreshed 2022 Silverado followed in early 2022 with a new interior (GM Authority, December 2021). GMC did the same with the Sierra 1500 Limited. Our listings are labeled 2019-2021, and we will not promise a fit for a 2022 that is not on the product page. Send us the VIN and a photo and we will tell you yes or no before you spend anything.

Installing it

The install happens at the center stack, behind the Auto Stop switch. The connection itself takes a minute. The trim is what takes time, so plan for patience rather than tools.

2020 Chevrolet Silverado 1500 LT Trail Boss
  1. Park, shift to P, turn the truck off and take the key fob out of the cab.
  2. Remove the lower trim bezel fastener and carefully pull the lower trim bezel outward.
  3. Release the lower trim panel and the surrounding dash trim.
  4. Remove the panel screws and move the panel out far enough to reach the back of the switch bank. You do not need to remove the whole center stack.
  5. Unplug the factory Auto Stop switch connector.
  6. Plug the module in between the button and the truck harness. Push each connector until it locks.
  7. Start the truck and check the switch light behaves as you expect before you refit the trim.
  8. Refit the panels and fasteners.

These steps follow the installation guide on the product pages. Removal is the reverse: unplug the module and reconnect the factory plug. Nothing is reprogrammed, so there is nothing to undo.

Tips from owners who called halfway through

  • Cold plastic breaks. If it is below freezing, warm the cab for ten minutes first.
  • Work the clips one at a time. Pulling a whole edge at once is how tabs snap.
  • A half-seated connector is the usual problem. If the truck still starts with Auto Stop on, unplug and reseat both ends.
  • Test with a warm engine. A cold engine may not Auto Stop anyway, so drive a few miles before you decide whether it works.
  • Keep the factory plug clean. You may want to return the truck to stock one day.

Towing, Tow/Haul and remote start

Towing is the reason many truck owners want Auto Stop gone, so here is exactly how it works. GM lists "Tow/Haul Mode or other driver modes have been selected" among the conditions under which Auto Stop will not occur (2019 Silverado 1500 owner's manual). If you tow with Tow/Haul selected, the factory system already stays out of the way while it is on. The part matters on the drive to the trailer, the empty trip home, and any time you tow something light without selecting Tow/Haul.

The part does not change how the truck tows, shifts or brakes. It only restores your OFF setting at startup.

Remote start is not affected either. The module sits in the switch circuit and restores your setting when the truck starts. If something about remote start behaves differently on your truck after the install, unplug the module, test again and let us know.

Safety points worth repeating

GM's manual carries a warning that every driver of a Stop/Start truck should know: "The automatic engine Stop/Start feature causes the engine to shut off while the vehicle is still on. Do not exit the vehicle before shifting to P (Park). The vehicle may restart and move unexpectedly" (2019 Silverado 1500 owner's manual).

That warning is one reason some owners prefer the system off, especially when other people drive the truck. A quiet engine at a stop can make a new driver think the truck is off. With your OFF setting restored at every start, a stopped truck sounds like what it is: running and in gear.

The same manual also lists "the hood has been opened" among the Auto Stop conditions. Treat any truck with Stop/Start as live whenever the ignition is on, and turn it off before working under the hood.

The battery: keep the right one

GM's 2021 manual insert notes that trucks with Stop/Start use an Absorbed Glass Mat (AGM) 12-volt battery, and that a standard flooded battery "will result in reduced 12-volt battery life." It also recommends using a charger's AGM setting to limit charge voltage to 14.8 volts (GM 2021 manual insert).

The battery also controls the system. A low charge or a recently disconnected battery will stop Auto Stop from happening. That catches people out in two ways. After a new battery goes in, Auto Stop may not work for a while, which is normal. And if the system has gone quiet on its own, a weak or wrong-type battery is the likely cause. Neither is a reason to buy a module.

The module does not change charging, and it does not change which battery the truck needs. When it is time to replace it, use the type on the original label. Our Auto Stop battery cost ledger goes through AGM prices and lifespans.

Before you order: rule out a problem

These parts are for a working Stop/Start system that you prefer to keep off. They are not repairs. The product pages say so plainly: they are not designed to fix Stop/Start unavailable messages, battery or charging faults, damaged switches or wiring, existing trouble codes, or abnormal stalling or restarting.

  • If the truck shows a battery or charging warning, diagnose that first.
  • If the engine stalls, restarts roughly or fails to restart after an Auto Stop, get it checked.
  • If the switch itself is damaged or does nothing, the switch needs attention, not a module.

Installing a part on a truck with an existing fault only makes the diagnosis harder.

What owners report to NHTSA

We read every complaint NHTSA holds for the 2019 to 2023 Silverado 1500 and Sierra 1500 and counted the ones that mention Auto Stop or the Stop/Start system. Push-button ignition complaints that only mention the "start/stop button" were left out. Each total links to NHTSA's complaint data for that model year.

Model year and vehicleAll NHTSA complaintsMention Auto Stop or Stop/Start
2019 Silverado 15001,1087
2020 Silverado 15007556
2021 Silverado 15008634
2022 Silverado 15006664
2023 Silverado 15004006
2019 Sierra 15006634
2020 Sierra 15004861
2021 Sierra 15006066
2022 Sierra 15006131
2023 Sierra 15005202

Two things stand out. The first is how small the numbers are: a few reports a year out of several hundred to more than a thousand complaints per truck. Most owners who dislike the system never file anything, so treat the table as a list of cases, not a failure rate. The second is that the reports fall into a few clear types, and only one of them is about preference.

The four kinds of report

  • The pause before moving. A 2021 Sierra owner wrote that pulling into traffic from a stop brings "a significant delay for the car to restart and get moving" and that there was no way to keep the system off (ODI 11413684, NHTSA). This is the system working as designed, and it is the situation the eliminator is made for.
  • No restart at all. Another 2021 Sierra owner reported that the truck would not restart after an Auto Stop at signs and lights, even though the battery, starter and alternator had tested fine (ODI 11739883, NHTSA). That is a fault, not a preference.
  • Warning messages after a restart. A 2020 Silverado owner described a slow, two-turn restart at a green light followed by a run of system messages, including brakes and ESC, and a loss of brake function (ODI 11667337, NHTSA). A 2019 owner described a failed auto restart followed by reduced steering assist and a trailer brake message (ODI 11438650, NHTSA).
  • Repeated system faults. A 2020 Silverado owner reported five check-engine visits for the same Auto Stop failures, with OnStar diagnostics pointing at the engine and transmission and at a lithium-ion battery (ODI 11377565, NHTSA).

These are owner statements. NHTSA does not verify them, and we cannot say what caused any of them. What they do show is where the line sits. If your truck pauses and then goes, the system is behaving normally and switching it off is a matter of choice. If it fails to restart, restarts with warnings, or keeps setting codes, that truck needs a diagnosis, and an eliminator would only hide the symptom that helps a technician find the fault.

What changes after the install

2021 Chevrolet Silverado 1500 LTZ crew cab

You start the truck and Auto Stop is already off. At the first light the engine keeps idling, the air stays cold, and there is no pause when you pull away. The button is still there, and still works, for the day you want Auto Stop on.

Fuel use in city driving goes up slightly, in line with the federal figures above. Nothing else changes: no codes, no change to the engine or transmission software, and nothing different about how the truck starts.

For dealer visits, tell the service writer the part is installed, especially for any electrical diagnosis, and unplug it if asked. Warranty decisions belong to the dealer and manufacturer, and keeping the factory connector intact makes that conversation simple. For a lease return or a sale, unplug it or tell the next owner what it is.

For the SUVs that share these engines, see our Tahoe, Suburban and Yukon guide. For the cylinder deactivation side of GM's V8s, see how AFM and DFM work and disabler vs. delete vs. tune.

What idling at stops costs

Fueleconomy.gov gives a simple way to check the fuel side for yourself. It says idling can use a quarter to a half gallon of fuel per hour, depending on engine size and air conditioner use (fueleconomy.gov). A V8 pickup with the air on sits toward the top of that range. The table turns that into a yearly figure for three kinds of driving.

Example driver (our assumptions)Engine-off time a dayDays a yearHours a yearFuel at 0.25-0.5 gal/hrCost at $3.50/gal
Mostly highway commute3 minutes250about 12.5about 3-6 galabout $11-$22
Mixed suburban driving8 minutes250about 33about 8-17 galabout $29-$58
Heavy city or school-run driving20 minutes250about 83about 21-42 galabout $73-$146

The minutes are our assumptions, not measured figures, and they only count the time the engine would actually have been off. Auto Stop does not happen on every stop: a cold engine, a low battery, heavy climate demand or Tow/Haul can all keep it running. If your truck stops less often than this, the cost is lower.

Fueleconomy.gov also notes that restarting takes about 10 seconds' worth of fuel, which is why the system can save fuel at a long light. For most highway and mixed drivers, the yearly cost of keeping it off works out to a few tanks or less.

Frequently asked questions

What is the difference between the eliminator and the memory module?

On these trucks, very little. Both plug in behind the factory switch, restore your OFF setting at each start, keep the button usable and cost $79.99.

Can I still turn Auto Stop on?

Yes. The factory A-OFF button stays usable with either part. Press it to turn Auto Stop on for that drive.

My 2021 Silverado has no Auto Stop button. What do I need?

Nothing. GM built most V8 trucks with the 10-speed from June 2021 without Stop/Start (RPO NSS). The feature cannot be added back.

Will a Silverado part fit a Sierra?

Order the listing for your truck. Silverado and Sierra versions are listed separately.

Does it fit a 2022?

Our listings cover 2019-2021. The 2022 Limited is a carryover truck, but send us the VIN and a switch photo before ordering for any 2022.

Does it plug into the OBD-II port?

No. It installs inline behind the Auto Stop switch on the center stack.

Will it void my warranty?

It does not reprogram anything and unplugs to return to stock. Coverage decisions belong to the dealer and manufacturer; remove it before electrical diagnosis if asked.

Why does my truck sometimes not Auto Stop even with the system on?

GM lists many reasons, including climate demand, battery charge, temperature, Tow/Haul, a steep grade, an open door or hood. That is normal.

Do many Silverado and Sierra owners complain to NHTSA about Auto Stop?

Not many. For 2019 to 2023 trucks we found a handful of Auto Stop reports per model year out of hundreds of complaints. Most concern the restart delay, failed restarts or warnings after a restart.

My truck shows warnings after an Auto Stop restart. Will an eliminator fix it?

No. Warnings, failed restarts or codes after an Auto Stop point to a fault, often in the battery or charging system. Have it diagnosed and check for open recalls by VIN first.

How much fuel does keeping Auto Stop off cost?

Fueleconomy.gov says idling uses a quarter to a half gallon an hour. In our examples that works out to roughly $11 to $146 a year, depending on how much stopped time you have.

Sources

Every outside figure in this article links to one of these sources. Store experience is described in general terms only.

  1. 2019 Chevrolet Silverado 1500 owner's manual (GM) · Stop/Start operation, conditions, disable switch, Park warning
  2. GM 2021 owner's manual insert (trucks and SUVs) · Auto Stop enabled each start; AGM battery and charging
  3. GM Service Bulletin 21-NA-132 (via NHTSA) · RPO NSS from June 2021; NSS identification; unchanged components
  4. GM Authority, June 7, 2021 · Stop-start removed from some 2021 trucks; $50 credit
  5. GM Authority, December 17, 2021 · 2022 Silverado 1500 Limited carryover and production dates
  6. Fueleconomy.gov, other fuel-saving technologies · Stop-start potential improvement
  7. EPA Green Vehicle Guide · Start-stop fuel economy range
  8. NHTSA complaint data, 2019-2023 Silverado 1500 and Sierra 1500 · Owner reports mentioning Auto Stop; counts by model year
  9. Fueleconomy.gov, driving more efficiently · Idle fuel use and restart fuel

Next steps

Go straight to your part:

Or browse the Chevrolet and GMC Auto Stop aisles. Own a 2022, or not sure your 2021 has the system? Send us the VIN and we will check before you order.

Fast Shipping

Free standard shipping in the contiguous US

Quality Guarantee

All parts backed by a 3-year warranty

Secure Payment

100% secure online transactions

Expert Support

Our technical team is ready to help

Stay in the loop
By entering your email address you agree to receive marketing
messages from Re-ControlX. You may unsubscribe at any time.